View Full Version : O/T: M5 East tunnel closed
Lee G
8th May 2010, 02:08 PM
Slightly off topic I know but just in case anyone is heading out to the airport this afternoon - M5 East tunnel eastbound is closed after a truck carrying earthmoving equipment tried to excavate the ceiling of the tunnel! :eek:
Kieran Wells
8th May 2010, 06:32 PM
Saw it on the news...I think it might be closed into tomorrow as well.
Ryan N
8th May 2010, 07:29 PM
Traffic gridlock along King Georges Road and surrounding areas. Look me an hour to drive from Hurstville to Burwood, when it normally takes half an hour.
Philip Argy
8th May 2010, 11:49 PM
Most tunnels these days have a height barrier well ahead of the main entrance, so that anything oversize is snagged and alarms triggered before something like this can occur.
I wonder why M5 didn't have this or, if it did, why it didn't work as planned.
Ryan N
9th May 2010, 08:36 AM
On the news this morning, it said the driver could be fined $55K.
Nigel C
9th May 2010, 01:16 PM
That's getting off lightly.
Andrew P
9th May 2010, 05:37 PM
Most tunnels these days have a height barrier well ahead of the main entrance, so that anything oversize is snagged and alarms triggered before something like this can occur.
I wonder why M5 didn't have this or, if it did, why it didn't work as planned.
but I like the cross harbour when tripped, a shower of water is dropped fromt eh roof and stop sign shown by laser light in it
The Softstop Barrier System produces a pseudo holographic image that appears to float in mid air, commanding the attention of the motorist making the 'STOP' message impossible to miss.
http://www.laservision.com.au/page.asp?lid=1&sec=Projects&subsec=Permanent+Attractions&subsubsec=Softstop
andrew evans
9th May 2010, 07:45 PM
Some pics from last night.Keep in mind i was using 2 mega pixel phone camera.:D
http://farm5.static.flickr.com/4067/4590945283_860826980a_b.jpg
http://farm5.static.flickr.com/4040/4591565576_6158cfbfb7_b.jpg
http://farm5.static.flickr.com/4043/4590944445_432831ff9b_b.jpg
Philip Argy
9th May 2010, 08:30 PM
Seeing the offending excavator for the first time creates in my mind the possibility that when originally loaded on its carrier the arm might not have been extended. What if it had somehow extended slightly in transit and perhaps been raised further by initial contact with an early warning gantry thus ensuring that it was raised too high to fit into the main tunnel?
Just a thought - no doubt the investigation will reveal what really happened but something along those lines seems to me a more plausible explanation than a driver ignoring all warnings and continuing at full speed into the tunnel knowingly overheight.
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.