View Single Post
  #8  
Old 17th June 2017, 10:12 PM
Glenn Stewart Glenn Stewart is offline
Member
 
Join Date: Apr 2008
Posts: 20
Default

Site Variables

The following variables are site specific. You might already have Flightaware, or Planefinder or Flightradar24 working. If so, these variables will be familar. You can simply plug in your existing variables and you're done.

If you've never sent data to any of these before, just leave everything blank and we'll come back to them.

These should be set per device. Sites often require new ID's on a per device basis. Worth noting, none of these variables should be shared with other individuals. These are uniquely yours, and yours alone. Resin.io sends these to your device securely.

Per Device Variable Setting
  1. Click on your application in Resin.io
  2. Click on the specific device you want to configure
  3. Click on "Environmental Variables" directly below "Device Summary"

[*] Set only the variables below that you know. Otherwise come back later to set once you know.

Flightaware Variables

If you have a pre-existing Flightaware device you can find these variable on you "My ADSB" on your Flightaware page once you login.
  • PIAWARE_MAC = <Your "MAC" address> - This is now deprecated and should only be used if you want to carry over old statistics.
  • PIAWARE_ID = <Your feeder id> - This is a new ID found on all new Flightaware installs.

Planefinder Variables

If you have a pre-existing Planefinder feeder, go to https://planefinder.net/sharing/account to view your receivers. Take note of these addresses. These become your variable values.
  • PF_SHARECODE = <The unique sharecode of your device starting with 5>

Flightradar24

If you have a pre-existing Flightradar24 feeder, go to https://www.flightradar24.com/account/data-sharing and take note of your sharing key. These become your variable values.
  • FR24_KEY = <Your Flightradar sharing key>

If any of these are unknown due to never submitting before, or you want to start feeding for the first time - leave the variables blank for the moment.
Reply With Quote